This EN Sole Flexing Tester is used to measure the flexing resistance of shoe soles under continuous movement. Before test, plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length.
Standards: SATRA TM161, ISO 17707, ISO20344-2020 section8.6 , ISO20347 section 5.8.4, AS/NZS 2210.2 section8.4.2 GB/T 20991section8.4.2, QB/T 2885, DIN 53543
Dimensions
Feature
Plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length.
Key Specifications
Model
GT-KB06A
GT-KB06B
Test position
3
6
Control mode
Touch screen controlled
Bending angle
90±2 °
Bending speed
125-150cpm
Mandreldiameter
30 mm
Clamps apart
110±1mm
Movable fixture stroke
41.5 ±0.5 mm
Counting
0-9999999
Power supply
1∮AC 220V 50/60HZ
Dimensions
105x42x60cm
105x60x60cm
Weight
About 90kg
160kg
Accessories
Standard accessories
1set
Spanner
1pcs
Chisel cutter(2mm)
1pcs
Power line
Application Industry
All the material blow can be tested on the EN Sole Flexing Tester
