Martindale Abrasion and Pilling Tester GT-C13B 

  

Product Introduction of martindale machine

Application of martindale abrasion tester:

The martindale abrasion and pilling tester is used to determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrade at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.

Standards of martindale abrasion tester:
Abrasion: GB/T 21196.2, GB/T 13775, ISO 12947, ASTM D4966, IWS TM 112, M﹠S P19, Next 18, SN 198529, TWC 112, JIS L1096 ( ISO17076-2 ball plate method ,optional)
Pilling: GB/T 4802.2, ISO12945-2, ASTM D4970, IWS TM 196, M﹠S P17, Next TM26, SN 198525

Dimensions of martindale machine

Feature of martindale tester

 

1.Test Standard: Lissajous figure.

2.Martindale Abrasion and Pilling Tester Working positions: 4, 6, 8, 9 optional.
3.Counting Method: 1) count up. 2) count down.
4.The unique design allows removal of individual sample holders 5.for examination without lifting the top motion plate.
6.Standard sample holders with 9 and 12kpa weights included.
7.PLC, 7 inches color touch screen, Chinese and English operation interface.
8.Weights and key components are made up by stainless steel which is well-formed and durable in use.

9. To prevent distortion, the top motion plate was special made up by 316 aluminum alloy.

Key Specifications of Martindale Tester

 

Model		GT-C13B-4	GT-C13B-6		GT-C13B-8			GT-C13B-9
Working positions		4	6		8			9
Control mode		PLC control and touch screen display
Counter range		0~999999 times
Test pressure	Abrasion test	A)Specimen holder: (198 ±2)g  B) Larger loading piece: (597±5)g C) The sum mass: (795± 7)g , for workwear , upholstery, bed linen and fabrics for technical use ( nominal pressure of 12kpa)
		A)Specimen holder: (198 ±2)g  B) Smaller loading piece: (397±5)g C) The sum mass: (595± 7)g, for apparel and household textiles, excluding upholstery and bed linen (nominal pressure of 9kpa)
	Pilling test	A) Stainless steel loading piece: (155 ± 1) g B) Specimen holder: (260 ± 1)g C) The sum mass: (415± 2)g
Holder effective diameter		A) Abrasion Holder: Φ(28.65 ± 0.05)mm
		B) Pilling Holder: Φ(90 ± 0.10)mm
Rotational speed		47.5± 2.5r/min
Pressing weight		Mass: (2.5 ± 0.5) kg
		Diameter: Φ(120 ± 10) mm
Power supply		AC220V  50/60Hz
Dimensions(L x W x H)		60×55×41cm		88×61×41cm		90×62×41cm	90×62×41cm
Weight		75kg		130kg		145kg	150kg

Accessories A:

Abrasion weight and holder	1set
Pilling weight and holder	1set
Standard abradents fabric	2 pcs for each head
Standard backing foam 38mm	box of 60pcs
Standard woven felt discs 140mm	2 pcs for each head
Standard woven felt discs 90mm	2 pcs for each head
Photographs (copy one)	1set
Sample cutting template(Φ38m , Φ90mm, Φ140mm)	1pc for each size
Pressing weight	1pc
Auxiliary device for specimen mounting	1pc
Steel ball	3pcs
Power line	1pc